Hamshop.cz

This is DL2MAN's sandwich radio with the following PCBs: uSDX RF Board Rev v3.1 uSDX OLED IO Board v2.2 uSDX Mainboard v2.7 - 

Keying out with optocoupler for M5-ESP32-keyer. A 3.5mm JACK cable is enough to connect the radio. https://github.com/ok1cdj/M5-ESP32-k

TTGO T-Beam with APRS LoRa FW https://github.com/oe3cjb/TTGO-T-Beam-LoRa-APRS

Length 1m, Anderson Power Pole 30A type

For replacement of UHF (SO-239) connetor in transceiver like FT-817, FT-818, FT-897, FT-857 and ohers.

Open souce interface for emulation of SAT mode for 2x FT817 (FT818, 857, 897). Easily modifiable and programmable via Arduino.

This is preamplifier module with 2N5109 transistor based on W7IUV design. You can use it as high IP preamplifier, buffer amplifier or small...

Precise adapter up to 6GHz with o-ring seal. Suitable for mounting on a waterproof box.

TCXO 25.78718 MHz- QO100 10489 MHz is 432 MHz

TCXO 40,00 MHz 1,8V uses ASTX-13-C-40.000MHz-I05-T 0.5ppm for ADALM Pluto SDR 

Cable BNC (M) BNC (M) RG174 1m impedance: 50 ohm max. attn (dB/100m): 10 MHz 5dB / 20 MHz 6,5dB / 50 MHz 11dB

N (MALE) SMA (FEMALE) DC-13GHz Insertion Loss

K3NG Open Source Arduino CW keyer with WinKey support. Ready to use. https://github.com/ok1cdj/OpenCWKeye

K3NG open source Arduino CW keyer with WinKey support. KIT contains all parts and laser engraved case. SMD parts are presoldered on the PC

Bandpass filter for 2.4GHz band. 2dB pass-through attenuation. Suitable for SDR (Pluto, LIME, HackRF). Max. power 2W. Insertio

Frequency: DC - 6 GHz Attenuation: 30dB Impedance: 50 Ohm Power: 10W Attenuation accuracy: +/- 1.5dB max. Connector

Ready to use triband trapped endfeed half wave antenna. Ideal for portable or SOTA operation. Lenght: 20m Weight: 200g Max. power:

Mini morse paddle, uses micro switches and standard 3.5mm jack as output. Parts are made on 3D printer. Very small and light, ideal for

RTL SDR with RTL2832U + R820D. Antenna connector is SMA. TCXO 0.5ppm. Metal box. Frequency range 25 MHz to 1.7 GHz. Listo

TinySWR is a simple SWR and RF power indicator for QRP transceivers on a very small PCB, developed by Martin Hepp, DK3IT. For more information,

Altois L tuner kit. Kit contains all parts, like pcb, switch, amidon toroid.. You need only Altoids case. More: http://blog.ok1cdj.com/

SMA male - 0-9GHz flex semi-rigid 2,2mm, 50 Ohm lenght 10cm Lenght 10cm Attenuation 0.66 dB/1m at 1 GHz 

Perfect winder for wire antennas or ropes for SOTA or portable operation. Lenght 25cm. Weight 50g. Balck color.

QRP Antenna Tuner Frequency range: 1-30 MHz Max. power: 15W Max. power when is in tunning mode: 3W

Frequency Range: 400~470MHz 

Toroid AMIDON

Mini Iambic Magnetic Morse Paddle, great for SOTA or portable operation. New improved version. Weight only 35g. Connect

Cable BNC (M) BNC (M) RG316 1m impedance: 50 ohm 

Cable BNC (M) BNC (M) RG316 0.5m impedance: 50 ohm 

Frequency: DC - 6 GHz Attenuation: 20dB Impedance: 50 Ohm Power: 10W Attenuation accuracy: +/- 1.5dB max. Connector

Length 1m, no connector